Surefoot™ Grounding; Figure 2- 4: Using A Surefoot Adapter For Grounding - Tektronix P6245 Manuel D'utilisation

Helpful Hints
SureFoot™ Grounding
If you cannot use the low-inductance grounding method recom-
mended, the probe may be grounded to the package under test using
a SureFoot adapter. Refer to Figure 2- - 4.

Figure 2- 4: Using a SureFoot Adapter for Grounding

Use a SureFoot adapter at the end of a short ground lead to connect
directly to the package ground. This method is preferred over using
an adjacent circuit ground because it is the shortest ground path
possible.
2- 6
P6245 Instruction Manual