Inspection And Cleaning; Replacement Parts; Preparation For Shipment - Tektronix P6245 Manuel D'utilisation

Inspection and Cleaning

To prevent damage to probe materials, avoid using chemicals that
contain benzine, benzene, toluene, xylene, acetone, or similar
solvents.
Do not immerse the probe or use abrasive cleaners.
Dirt may be removed with a soft cloth dampened with a mild
detergent and water solution, or isopropyl alcohol.

Replacement Parts

Refer to the Replaceable Parts section for a list of customer
replacement parts. Due to the sophisticated design of the P6245,
there are no user replaceable parts within the probe.

Preparation for Shipment

If the original packaging is unfit for use or not available, use the
following packaging guidelines:
1. Use a corrugated cardboard shipping carton having inside
dimensions at least one inch greater than the probe dimensions.
The box should have a carton test strength of at least 200 pounds.
2. Put the probe into a plastic bag or wrap to protect it from
dampness.
3. Place the probe into the box and stabilize it with light packing
material.
4. Seal the carton with shipping tape.
P6245 Instruction Manual
Maintenance
4- 17