Product Description; Standard Accessories - Tektronix P6245 Manuel D'utilisation

Product Description

The Tektronix P6245 is a 1.5 GHz (probe only), 10X active FET
probe with less than 1 pF input capacitance. The P6245's low input
capacitance and high input resistance minimize circuit loading over a
wide bandwidth range. The P6245's small profile and low-mass head
makes probing crowded circuits by hand fast and easy. The accessory
tips and adapters enable the P6245 to be used on a wide variety of
circuit architectures.
The P6245 is powered through a TEKPROBE interface between the
probe's compensation box and the oscilloscope. The P6245 may be
used with non-TEKPROBE oscilloscopes and instruments by using
the optional Tektronix 1103 Probe Power Supply.
In order to fully appreciate the probe's capabilities, please read the
Getting Started and Operating Basics sections of this manual.

Standard Accessories

The P6245 is shipped with the following standard accessories:
H standard probe tips
H SMT KlipChip™ microcircuit test leads
H Y-lead adapter
H right-angle adapter
H signal-ground adapters
H three- and six-inch ground leads
H low-inductance ground lead
H marker rings
H Instruction Manual
For part number information for standard and optional accessories,
refer to the Replaceable Parts section of this manual.
P6245 Instruction Manual
1- 1