Tektronix P6245 Manuel D'utilisation page 20

Features and Accessories
KlipChip
1- 6
SMT KlipChip™. Use the SMT KlipChip test
clips to access fragile, dense circuitry.
KlipChip test clips can be connected to the Y-lead
or three- or six-inch ground leads. Simply press
the lead socket into the KlipChip handle.
The KlipChip body freely turns, allowing better
Y-lead
probe orientation. To reduce stress and provide a
Adapter
lower profile on components being tested, the
flexible sleeve of the KlipChip bends up to a
35 degree angle.
Color Marker
Color Marker Bands. Attach matching pairs of
Bands
the color marker bands onto the cable at the head
and compensation box of each probe. The marker
bands enable quick verification of which probe is
connected to which instrument channel.
SureFoot™ probe tip (optional). The
SureFoot tip is an integral probe tip and miniature
guide that enables fault-free probing of fine-pitch
SMD packages. Attach the SureFoot adapters the
same way as the push-in probe tips. They can be
used with any of the socketed accessory leads.
The yellow, 0.050 inch SureFoot tip is compatible
with 50 mil JEDEC packages such as SOIC,
PLCC, CLCC, etc.
The blue, 0.025 inch SureFoot tip is compatible
with 0.65 mm JEDEC and EIAJ packages.
The red, 0.5 mm SureFoot tip is compatible with
EIAJ packages.
P6245 Instruction Manual