Technical Data; Noise Information - Bosch GCM 18V-216 Professional Notice Originale

30 | English
(56) Screw for mitre angle indicator

Technical data

Sliding mitre saw
Article number
No-load speed
Laser type
Laser class
Laser line divergence
Weight according to EPTA-Procedure
01:2014
Permitted ambient temperature
– during charging
B)
– during operation and during stor-
age
Recommended batteries
Recommended chargers
Recommended chargers for inductive
batteries
Dimensions of suitable saw blades
Saw blade diameter
Base blade thickness
Hole diameter
A)
Depends on battery in use
B)
Limited performance at temperatures <0 °C
Permissible workpiece dimensions (see "Permissible workpiece dimensions", page 34)

Noise information

Noise emission values determined according to EN
62841-3-9.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 95 dB(A); sound power level
104 dB(A). Uncertainty K = 3 dB.
Wear hearing protection
The noise emission value given in these instructions has
been measured in accordance with a standardised measur-
ing procedure and may be used to compare power tools. It
may also be used for a preliminary estimation of noise emis-
sions.
The noise emission value given represents the main applica-
tions of the power tool. However, if the power tool is used
1 609 92A 4UN | (05.06.2019)
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
-1
min
nm
mW
mrad (full angle)
kg
°C
°C
mm
mm
mm
for other applications, with different application tools or is
poorly maintained, the noise emission value may differ. This
may significantly increase noise emissions over the total
working period.
To estimate noise emissions accurately, the times when the
tool is switched off, or when it is running but not actually be-
ing used, should also be taken into account. This may signi-
ficantly reduce noise emissions over the total working
period.
Assembly
Remove the battery from the power tool before carry-
u
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
GCM 18V-216
3 601 M41 0.. 3 601 M41 0B0
4600
650
< 0.39
1M
1.0
A)
15.1−16.1
0 to +45
-20 to +50
ProCORE18V...
GBA 18V...
GBA 18V... W
AL 18..
AL 36..
GAL 18V-...
GAL 18..
GAX 18V-30
GAL 3680
GAL 18.. W
216
1.2−1.8
30
GCM 18V-216
4600
650
< 0.39
1M
1.0
A)
15.1−16.1
0 to +45
-20 to +50
ProCORE18V...
GBA 18V...
GBA 18V... W
AL 18..
AL 36..
GAL 18V-...
GAL 18..
GAX 18V-30
GAL 3680
GAL 18.. W
216
1.2−1.8
25.4
Bosch Power Tools