Declaration Of Conformity; Product Features - Bosch PLR 50 C Notice Originale

OBJ_BUCH-2326-003.book Page 29 Thursday, August 20, 2015 8:43 AM

Declaration of Conformity

We declare under our sole responsibility that the product described under "Technical
Data" complies with all applicable provisions of the directives 1999/5/EC and
2011/65/EU including their amendments and is in conformity with the following
standards: EN 61010-1: 2010-10, EN 60825-1: 2014-08,
EN 300 328 V1.8.1: 2012-06, EN 301 489-1 V1.8.1: 2008-04,
EN 301 489-1 V1.9.2: 2011-09, EN 301 489-17 V2.2.1: 2012-09,
EN 62479: 2010-09.
Technical documents at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 20.08.2015

Product Features

The numbering of the product features shown refers to the illustration of the measur-
ing tool on the graphic page.
1 Measuring button/On/Off button
2 Touchscreen
3 Positioning plate
4 Battery lid
5 Latch of battery lid
6 Serial number
7 Laser warning label
8 Laser beam outlet
9 Reception lens
10 Laser viewing glasses*
11 Laser target plate*
12 Protective pouch
Bosch Power Tools
English | 29
1 609 92A 1F3 | (20.8.15)