Operating Your Appliance - Avantgarde Elite Série Manuel D'utilisation

OPERATING YOUR APPLIANCE

Touch-screen Control Panel
Touch-screen control panel is on the front of glass door for convenient temperature reading and setting.
You can easily read the zone temperature without opening the door and control your unit just by
touching the screen. For details of temperature setting, please see "components and parts".
Two Temperature Zones
There are two zones in this appliance divided by a partition. Each zone has its independent
temperature control and display. The upper zone can hold up to 16 bottles while the lower zone can
hold up to 28.
Interior Light
Each zone has its own interior light, which can be switched on or off by pressing the pad (light) on
the control panel.
Upper Zone
There are two wine shelves of full depth in the upper zone. Each shelf can holds up to 8 bottles with the
bottle necks alternating front to back. The second supporting guide in the upper zone (counted from
top, see illustration on this page) is not designed to be a wine shelf. (see illustration A)
Lower Zone
There are also two wine shelves of full depth in the lower zone. Each shelf can holds up to 8 bottles
with the bottle necks alternating front to back. The bottom rack in the lower zone, which consists of two
stories, each holds up to 6 bottles with bottle necks facing the front (see illustration)
Engaged Wine Shelves
All the wine shelves of full depth have tabs to engage the cabinet on both sides. Any of the shelves can
be removed to accommodate larger bottles.
To Remove a Shelf:
Remove all bottles from the shelf and lift it upwards and then gently pull out.
To Replace a Shelf:
Place the sides of the shelf back onto the supporting guides of the cabinet and push back until the shelf
tabs slide into place.
NOTE: Ensure that the tabs are firmly engaged in place before storing any bottles.