Accessing The Camera Using The Web Browser - Sony ExwaveHAD SNC-CS3N Manuel D'installation

To specify the DNS server
addresses manually:
Select Use the following DNS server
address, and type the primary DNS
server address and Secondary DNS
address in each box.
Note
The Third DNS Server address and
Fourth DNS Server address are invalid
for this camera.
9
Set the HTTP port number.
Normally select 80 for the HTTP port
No. To use another port number, select
the text box and type a port number
between 1024 and 65535.
10
Type the Administrator name
and Administrator password.
The default settings of both items are
"admin."
Note
You cannot change the Administrator
name and Administrator password in this
step. To change these items, see "Setting
the User – User setting Page" of the User's
Guide stored in the supplied CD-ROM.
11
Confirm that all items are
correctly set, then click OK.
If "Setting OK" is displayed, the IP
address is correctly assigned.
Accessing the Camera Using
the Web Browser
When the IP address has been assigned to
the camera, check that you can actually
access the camera using the Web browser
installed in your computer.
Use Internet Explorer as the Web browser.
For details on the operations using the Web
browser, see the User's Guide stored in the
supplied CD-ROM.
1
Start the Web browser on the
computer and type the IP
address of the camera in the
URL box.
Example:
The Welcome page of Network
Camera SNC-CS3 is displayed.
2
Click ActiveX viewer.
The Main Viewer page is displayed and
the monitor image from the camera
appears on the screen.
When you display the monitor image
from the camera for the first time, the
Security Warning appears. Click Yes
and install the ActiveX Control.
Assigning the IP Address to the Camera
13
GB