Sony ExwaveHAD SNC-CS3N Manuel D'installation page 42

Monitor image
Now the IP address assignment is
completed.
Proceed to "Installing the Camera."
Note
To operate the welcome page correctly, set
the security level of the Internet Explorer to
Medium or lower, as follows:
1
Select Tool from the menu bar of
Internet Explorer, then select Internet
Options and Security tab in
sequence.
2
Click the Internet icon (when using
the camera via the Internet) or Local
intranet icon (when using the camera
via a local network).
3
Set the slider to Medium or lower. (If
the slider is not displayed, click
Default Level.)
Notes
• When you install ActiveX viewer on
Windows NT4.0, Windows 2000 or
Windows XP, you should have logged in
the computer as the Administrator.
• If you cannot display the image on
Windows NT4.0 or Windows 98, install
MFC42DLL Version Up Tool stored in
the supplied CD-ROM.
• If Automatic configuration is enabled in
the Local Area Network (LAN) Settings
on Internet Explorer, the image may not be
14
GB
Assigning the IP Address to the Camera
displayed. In this case, disable Automatic
configuration and set the Proxy server
manually. For setting the Proxy server,
consult your network administrator.
• The page may not be displayed correctly if
you use antivirus software in your
computer.