Basic Installation And Connections; System Requirements; Connecting Power - Sony ExwaveHAD SNC-CS3N Manuel D'installation

Basic Installation and Connections

B
System
Requirements
Processor
Pentium III 500 MHz or higher (Pentium 4,
1 GHz or higher recommended)
RAM
128 MB or more
OS
Windows 98/ 98SE/ Me/ NT4.0/ 2000/ XP
Web browser
Internet Explorer Ver. 5.5 or Ver. 6.0

Connecting Power

Two power supply systems are provided for
this unit.
• 12 V DC
• 24 V AC
Connect the 12 V DC or 24 V AC power
supply system to the power input terminal of
the camera.
SEE INSTRUCTION MANUAL
NETWORK POWER
to 12 V DC or
About the power source
Use the 12 V DC or 24 V AC power source
isolated from the 100 to 240 V AC.
The usable voltage range is as follows:
12 V DC: 10.8 to 13.2 V
24 V AC: 21.6 to 26.4 V
Use the UL cable (VW-1 style 1007) for 12
V DC or 24 V AC connection.
For the 24 V AC power source, connect the
ground to the U terminal.
System Requirements /Connecting Power
10 9 8 7 6 5 4 3 2 1
CLASS 2 WIRING
+ DC 12V –
2 AC 24V 1
9
GB