AFG 3.3AT Manuel Du Propriétaire page 8

ASSEMBLY STEP 5
F
8
2 4
14
AFG14_OM_3.3AT_Rev1_2.indd 14-15
HARDWARE FOR STEP 5
PART TYPE QTY
F SCREW 10
A Open HARDWARE FOR STEP 5.
B Slide both CONSOLE MAST COVERS (8)
under the console around CONSOLE MAST
(2).
C Attach CONSOLE MAST COVERS (8) using 4
SCREWS (F) from the inside and 1 SCREW (F)
from the front.
D Repeat on other side (4).
ASSEMBLY STEP 6
5
7
9
D
C
E
HARDWARE FOR STEP 6
PART TYPE QTY
E BUTTON HEAD BOLT 6
C SPRING WASHER 6
D FLAT WASHER 6
NOTE: Be careful not to pinch the console
cables while attaching the console.
Open HARDWARE FOR STEP 6.
A
Connect the HEART RATE CABLES
B
(7) and carefully tuck them inside the
CONSOLE (5).
C Attach HEART RATE BAR (9) to the
CONSOLE (5) using using 3 BOLTS (E),
3 SPRING WASHERS (C) and 3 FLAT
WASHERS (D).
Repeat on other side.
D
ASSEMBLY COMPLETE!
Before the first use, lubricate the treadmill deck by
following the instructions in the MAINTENANCE
section in the TREADMILL GUIDE.
7/31/14 4:41 PM
15