AFG 3.3AT Manuel Du Propriétaire page 14

LIVETRACK™ FITNESS JOURNAL SYSTEM
The integrated LIVETRACK software allows you to track your fitness progress over time without the need for paper journals or
logs. With LIVETRACK, you can easily compare your current workout to your last, average or lifetime workout totals. With quick
access to feedback like duration of workout or calories burned during previous workouts, you'll be able to see the progress
you've made.
SETUP
To activate LIVETRACK fitness journal system a user MUST
be chosen before the program begins. To select a USER 1 or
2, use – / + and press ENTER to confirm. All workout data will
accumulate only for the user that is chosen. NOTE: If no user is
selected data will not be tracked.
ACCUMULATED DATA
Once LIVETRACK is activated, you can scroll through your accumulated data in multiple formats by pressing the LIVETRACK
buttons. A workout is saved when: the program ends, the console is paused and not resumed within 5 minutes, or the STOP
button is held to reset the console.
1) PERSONAL BEST: allows user to scroll through and view 5
personal bests for all previous workouts. They are:
• Best Mile – fastest time in which the user has completed a
mile
• Best 5K – fastest time in which the user has completed a 5K
• Longest Workout – (time)
• Longest Workout – (distance)
• Calories Burned – most calories user has burned in one
workout
2) LAST 5 WORKOUTS: allows you to view data from your
previous 5 workouts. The following data from these 5
workouts can be scrolled through and viewed by pressing the
WORKOUT STATS key:
• Time – total time of selected workout
• Distance – total distance of selected workout
26
AFG14_OM_3.3AT_Rev1_2.indd 26-27
RESET
Reset all recorded information for User 1 or User
2 by selecting the user and then holding down the
WORKOUT STATS/HOLD TO RESET key for 10
seconds. NOTE: This step is permanent and will
delete ALL previously accumulated data for the
chosen user.
• Calories – total calories burned during selected
workout
• Pace – average pace during selected workout
• Elevation Gain (feet) – total elevation climbed, in
feet, during selected workout
3) WORKOUT TOTALS: allows you to view the
total accumulated workout data. Pressing the
WORKOUT TOTALS key will allow you to scroll
through the following totals:
• Total Workouts
• Total Distance
• Total Calories
• Total Time
• Elevation Gain – total elevation climbed in feet
USING YOUR MEDIA PLAYER
1) Connect the included AUDIO ADAPTOR CABLE to the AUDIO IN JACK on the left of the console and the
headphone jack on your media player.
2) Use your media player buttons to adjust song settings.
3) Remove the AUDIO ADAPTOR CABLE when not in use.
ENERGY SAVER (STANDBY MODE)
This machine has a special feature called Energy Saver™ mode. This mode is NOT automatically activated.
When Energy Saver mode is activated, the display will automatically enter standby mode (Energy Saver mode) after
15 minutes of inactivity. This feature saves energy by disabling most power to the machine until a key is pressed on
the console. This feature can be turned on or off in the engineering menu.
To enter the engineering menu, press and hold the + INCLINE key and – SPEED key for 3-5 seconds. Use the – / +
keys to navigate through the menu to ENG3. Press ENTER to select. Use – / + keys to select ENRGY SVE ON or
OFF. Press and hold STOP for 3-5 seconds to exit ENG3. Press and hold STOP again for 3-5 seconds to exit the
engineering menu.
27
7/31/14 4:41 PM