AFG 3.3AT Manuel Du Propriétaire page 6

ASSEMBLY STEP 1
A 1
10
AFG14_OM_3.3AT_Rev1_2.indd 10-11
HARDWARE FOR STEP 1
PART TYPE QTY
A BOLT 2
A Cut the yellow banding straps and lift the
running deck upward to remove all contents
from underneath the running deck.
B Open HARDWARE FOR STEP 1.
C Insert 2 BOLTS (A) into MAIN FRAME
BRACKETS (1).
ASSEMBLY STEP 2
2
D
1
C
B
HARDWARE FOR STEP 2
PART TYPE QTY
B BUTTON HEAD BOLT 8
C SPRING WASHER 8
D FLAT WASHER 8
A Open HARDWARE FOR STEP 2.
B Attach LEFT CONSOLE MAST (2) so that
BOLT (A) sits on the NOTCHED HOLE in the
bottom of the CONSOLE MAST.
C Attach LEFT CONSOLE MAST (2) to MAIN
FRAME BRACKET (1) using 4 BOLTS (B),
4 SPRING WASHERS (C), and 4 FLAT
WASHERS (D).
7/31/14 4:41 PM
11