Pilotlight Led; Flash Power Steps; Auto Return - Elinchrom Ranger Quadra AS Manuel D'utilisation

Pilotlight LED -ON- Time
Press 7x Scroll to change value
Press more than 3 s
Special Functions
Flash power steps per push
Press 8x Scroll to change value
Auto Return from Menu to normal display mode
Press 8x Press 1x Scroll to
change value
Set the Pilotlight LED Timer between 1..60
seconds
To deactivate the Timer for continuous Pilot-
light, press this touch more than 3 s.
Note: Continuous Pilotlight will consume
Battery energy. The number of flashes will be
reduced
1/10 flash power steps per push
Standard setting
2/10 flash power steps per push
3/10 flash power steps per push
4/10 flash power steps per push
5/10 flash power steps per push
1/1 flash power steps per push
After approximately 2 seconds the unit
returns from the "Setup Menu" to normal
display mode. All configurations are stored
automatically.
After approximately 5 seconds the unit
returns from the "Setup Menu" to normal
display mode. All configurations are stored
automatically.
15