Controls; Switching The Appliance On; Operating Tips; Setting The Temperature - Gaggenau RC 242 Mode D'emploi

Masquer les pouces Voir aussi pour RC 242:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Controls

1
On/Off button
Serves to switch the whole
appliance on and off.
2
Temperature selection button
The required temperature is set with this button.
3
"cold + fresh" display
Illuminates, if the appliance is in operation.
4
Refrigerator compartment display
Indicates the current temperature setting
in the refrigerator compartment.

Switching the appliance on

Switch on the appliance with the On/Off button 1 (see
appliance overview).
The temperature display 4 indicates the set
temperature. Displays 3 "cold+fresh" come on.
The appliance starts to cool, the light is switched on
when the door is open.
We recommend a setting of +4 °C.
Perishable food should not be stored above +4 °C.

Operating tips

After the appliance has been switched on, it may
take several hours until the set temperature has
been reached.
Do not put any food in the appliance beforehand.
While the refrigeration unit is running, water
droplets or a thin layer of ice may form at the rear
panel of the refrigerator. This is nothing unusual.
It is not necessary to scrape off the frost or wipe
off the water droplets. The rear panel defrosts
automatically. The condensation flows into
the evaporation area of the appliance via
the condensation channels and the drainage hole.
The partition in the lower "cool-fresh" container is
required for functional reasons and should not be
removed. The temperature behind the partition is
lower than in the front area of the container.

Setting the temperature

Refrigerator compartment

The temperature can be set from +3 °C to +8 °C.
Keep pressing temperature setting button 2 until
the required refrigerator compartment temperature
is set. The value last selected is saved.
The set temperature is indicated on display 4.

Cool-fresh compartment

The temperature in the "cool-fresh" compartment
Bhas been set to almost 0 °C at the factory and
should not be changed if at all possible.
If frost forms on the refrigerated food, the temperature
can be increased (see chapter "Eliminating minor
faults yourself").

Usable capacity

Information on the usable capacity can be found
inside your appliance on the rating plate (see diagram
at chapter "Customer service").
23

Publicité

Table des Matières
loading

Table des Matières