Microwave Power Levels - Sharp R-360 Mode D'emploi

KITCHEN TIMER FUNCTION
To cancel the kitchen timer function , You can press STOP/CLEAR key within 5 seconds.
NOTE: The KITCHEN TIMER function cannot be used whilst cooking.

MICROWAVE POWER LEVELS

Your microwave oven has 6 power levels. To set the power level follow the instruction below.
To set the power level
• Press the MICRO POWER key once, P100
will be displayed and at the same time
the microwave indicator ''
nate on the display.
• Press the MICRO POWER key to change
the power level until the display indi-
cates the desired level.
• Press the number keys '' 10Min'' , ''1Min'' ,
''10Sec'' to enter the cooking time and
then press the START/QUICK START key
to start the oven.
• To check the power level during cook-
ing, press the MICRO POWER key, the
current power level will be displayed
for 4 seconds. The oven will continue to
count down although the display will
show the power level
• In stand by mode, press the number keys
''10Min", ''1Min", ''10Sec" directly, the
default power level is P100.
Generally the following recommendations apply:
P100 - used for fast cooking or reheating e.g.
for casseroles, hot beverages,vegetables
etc.
P80 - used for longer cooking of dense
foods such as roast joints, meat loaf and
plated meals, also for sensitive dishes such
as sponge cakes. At this reduced setting,
the food will cook enenly without over
cooking at the sides.
P60 - for dense foods which require a long
cooking time when cooked conventionally,
e.g. beef casserole,it is advisable to use this
power setting to ensure the meat will be
tender.
User_manual_R360_WEST.indb 17
LED Display
'' will illumi-
P40 - Defrost setting to defrost, select this
power setting,to ensure that the dish de-
frosts evenly.This setting is also ideal for
simmering rice, pasta, dumplings and cook-
ing egg custard.
P20 - For gentle defrosting, e.g. cream ga-
teaux or pastry.
P00 - For cooling down the cavity tempera-
ture.
GB-17
Microwave Power
HIGH = 100 %
MEDIUM HIGH =
80 %
MEDIUM = 60 %
MEDIUM LOW =
40 %
LOW = 20 %
0 %
2016-08-10 16:19:31