Pelgrim IKM540 Notice D'utilisation page 133

uw espressomachine 6 Faults
PROBLEM
When the steam button is
pressed, no steam comes
out of the cappuccino
maker.
When the button
or is pressed, the
appliance does not deliver
coffee, but only water.
When the on/off button
is pressed, the appliance
does not switch on.
The infuser cannot be
removed for cleaning.
CAUSE
The holes in the
cappuccino maker and
steam nozzle are clogged.
The ground coffee may be
,
blocked in the funnel.
The appliance is not
plugged in or the main
switch on the right side
of the appliance is not
switched on.
The appliance is on.
The infuser can only be
removed if the appliance
is off.
SOLUTION
Clean the holes in the
cappuccino maker and the
steam nozzle (see page
121, fi g. 19).
Remove the ground coffee
inside the funnel using a
knife (see page 118, fi g 14).
Then clean the infuser and
the inside of the appliance
(see description in chapter
4.1.2 on pages 122, 123
and 124).
Check that the power cable
is plugged into the mains
socket and the main switch
is in the ON (l) position.
Turn the appliance off (with
the on/off button )and
remove the infuser (see
4.1.2 on page 122, fi g. 21).
IMPORTANT: the infuser
can only be removed if the
appliance is off. Attempting
to remove the infuser when
the appliance is on may
cause serious damage.
133