Pelgrim IKM540 Notice D'utilisation page 114

3 Use
coffee into the cup. Once the desired quantity has been reached, the appliance
automatically stops delivering the coffee and ejects the grounds into the special
container).
4. After a few seconds, the message that the machine is ready is displayed again and
you can make another coffee.
5. To turn the appliance off, press the on/off button
performs an automatic rinse cycle (a little hot water runs out from the spouts and is
collected in the drip tray beneath). Take care to avoid scalds.
Once switched off, the lights don't shut off immediately and the cooling span motor
operates to avoid condensation into the housing. After about 10 minutes, the
appliance switches completely off.
3.2.2 Notes
• If the coffee is delivered a drop at a time or not at all,
turn the grinding coarseness regulator (fi g. 7) one click
clockwise (see paragraph 3.2.4 on page 117, 'Regulating
the coffee mill') Turn one click at a time until the coffee is
delivered satisfactorily.
• If the coffee is delivered too fast and is not creamy
enough, turn the grinding coarseness regulator (fi g. 7) one
click anticlockwise (see paragraph 3.2.4 on page 117,
'Regulating the coffee mill'). Avoid turning the grinding
coarseness regulator excessively, otherwise the coffee may
run out in drips when you select 2 cups.
Tips to make hotter coffee
•
If 2/3 minutes have passed, since you last made coffee, before making coffee
º
again you must preheat the infuser by pressing the button
into the underlying drip tray or alternatively use this water to fi ll (and then empty)
the cup to be used for the coffee, so as to preheat it.
114
. Before going off, the appliance
. Run off the water
7