Changing And Setting The Menu Parameters; Setting The Clock; Setting Auto-Start Time - Pelgrim IKM540 Notice D'utilisation

4 Maintenance

4.2 Changing and setting the menu parameters.

The following menu parameters and functions can be changed by the user:
Clock;
•
Auto-start time;
•
• Descaling process;
Coffee temperature;
•
Length of time the appliance remains on;
•
• Water hardness;
Factory default values.
•

4.2.1 Setting the clock

To set the clock, proceed as follows:
1. Press the MENU button then press the NEXT button repeatedly until the appliance
displays CLOCK.
2. Press the CHANGE button to set the clock. (If you hold the CHANGE button down,
the time is changed rapidly).
3. Press the OK button to confi rm the value.
4. Press the MENU button to exit the programming mode or NEXT to change other
parameters.
5. When the appliance is in stand-by, you can see the hour by pressing one of the
buttons (except the on/off button).

4.2.2 Setting auto-start time

This enables the time the appliance will come on automatically to be programmed.
1. Make sure the clock on the appliance is set as described above.
2. Press the MENU button then press the NEXT button repeatedly until the appliance
displays START TIME.
3. Press the CHANGE button to set the auto-start time. (If you hold the CHANGE
button down, the time is changed rapidly).
4. Press OK to confi rm the value.
5. Press NEXT once and the appliance displays the message AUTO-START NO.
6. Press the CHANGE button to modify the function (the appliance displays AUTO-
START YES).
7. Press the OK button to activate auto-start.
8. Press the MENU button to exit the programming mode or the NEXT button to
change other parameters.
125