Changing The Coffee Temperature; Changing The Length Of Time The Appliance Remains On - Pelgrim IKM540 Notice D'utilisation

4 Maintenance
15. Press the OK button. Hot water is run off from the cappuccino maker into the
container below and the appliance displays RINSING.
16. When the water tank is empty, the appliance displays the message RINSING
COMPLETE PRESS OK BUTTON.
17. Press the OK button and refi ll the water tank with clean water.
18. The descale programme is now terminated and the appliance is ready to make
coffee again.
If the descaling cycle is interrupted before completion, the appliance continues to
display the descale message and the programme must be started again from the
beginning.
Failure to descale the appliance regularly invalidates the guarantee.

4.2.4 Changing the coffee temperature

To change the temperature of the coffee, proceed as follows:
1. Press the MENU button. Then press the NEXT button repeatedly until the appliance
displays TEMPERATURE MEDIUM.
2. Press the CHANGE button until the appliance displays the required coffee
temperature.
3. Press the OK button to confi rm the temperature selected.
4. Press the MENU button to exit the programming mode or NEXT to change other
parameters.

4.2.5 Changing the length of time the appliance remains on

The appliance is factory preset to go off automatically one hour after the last coffee has
been made. The number of hours the appliance remains on can be increased as follows:
1. Press the MENU button. Then press the NEXT button repeatedly until the appliance
displays OFF AFTER 1 HOUR.
2. Press the CHANGE button to change the number of hours the appliance remains on.
3. Press the OK button to confi rm the value.
4. Press the MENU button to exit the programming mode or NEXT to change other
parameters.
127