Faults; Problems That Can Be Resolved Before Calling The Service Centre - Pelgrim IKM540 Notice D'utilisation

uw espressomachine

6 Faults

Problems that can be resolved before calling the service
centre.
If the appliance is not working, the causes of the malfunction can be identifi ed and
resolved by referring to chapter 5. If, on the other hand, no message is displayed, run
the following checks before calling the service.
PROBLEM
The coffee is not hot.
The coffee is not creamy
enough.
The coffee runs out too
slowly.
The coffee runs out too
quickly.
The coffee does not come
out of one of the spouts.
132
CAUSE
The cups have not been
preheated.
The infuser is too cold.
The coffee is ground too
coarsely.
Wrong type of coffee.
The coffee is ground too
fi nely.
The coffee is ground too
coarsely.
The spout holes are
blocked.
SOLUTION
Heat the cups by rinsing
them in hot water (see
3.2.2 on pages 114 and
115: 'Tips to make hotter
coffee').
Heat the infuser by
pressing before making
the coffee (see 3.2.2 on
pages 114 and 115: 'Tips to
make hotter coffee').
Turn the grinding regulator
one click anticlockwise (see
chapter 3.2.4 on page 117).
Use a type of coffee for
espresso coffee machines.
Turn the grinding regulator
one click clockwise (see
3.2.4 on page 117).
Turn the grinding regulator
one click anticlockwise (see
3.2.4 on page 117).
Scrape off the dry coffee
residues with a needle (see
4.1.1 on page 122, fi g. 20).