Noise/Vibration Information - Bosch Isio Notice Originale

Isio
Battery Charger
Article number
Input voltage
Charging current
Allowable charging tem-
perature range
Weight according to
EPTA-Procedure 01/2003
Please observe the article number on the type plate of your garden product. The trade names of the individual garden
products may vary.

Noise/Vibration Information

Grass Shear
Measured sound values determined according
to EN 60745.
Typically the A-weighted sound pressure level of
the product is less than 70 dB(A).
Vibration total values (triax vector sum) deter-
mined according to EN 60335:
Vibration emission value a
Uncertainty K =1.5 m/s
Shrub Shear
Measured sound values determined according
to 2000/14/EC.
Typically the A-weighted noise levels of the
product are: Sound pressure level 69 dB(A);
sound power level 77 dB(A). Uncertainty
K =1.3 dB.
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
2
tainty K =1.5 m/s .
Bosch Power Tools
Grass Shear
EU 2 609 003 262
EU 2 609 003 263
UK 2 609 003 264
UK 2 609 003 265
V~ 230 (EU)
V~ 220 – 230 (EU)
V~ 230 (UK)
V~ 230 (UK)
mA
°C
kg 0.2 (EU)
kg 0.071 (EU)
kg 0.25 (UK)
kg 0.078 (UK)
2
=2.5 m/s ,
h
2
.
2
=2.5 m/s , Uncer-
h
Shrub Shear
2 609 003 262
2 609 003 263
2 609 003 264
2 609 003 265
230 (EU)
220 – 230 (EU)
230 (UK)
230 (UK)
400 400
0– 45 0– 45
0.2 (EU)
0.071 (EU)
0.25 (UK)
0.078 (UK)
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
English | 23
Grass Shear Shrub/Grass
with Pole Cart
2 609 003 262 2 609 003 262
2 609 003 263 2 609 003 263
2 609 003 264 2 609 003 264
2 609 003 265 2 609 003 265
230 (EU)
220 – 230 (EU) 220 – 230 (EU)
230 (UK)
230 (UK)
400
0– 45
0.2 (EU)
0.071 (EU)
0.25 (UK)
0.078 (UK)
F 016 L70 633 | (5.8.10)
Shear Set
230 (EU)
230 (UK)
230 (UK)
400
0– 45
0.2 (EU)
0.071 (EU)
0.25 (UK)
0.078 (UK)