Switching On The Appliance; Setting The Temperature; Fast Cooling Function - Bosch B20CS30SNS Notice D'utilisation Et De Montage

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Switching on the appliance

Plug the power plug into the electrical outlet socket.
The appliance will start cooling.
When the appliance is switched on for the first time, the
alarm function is deactivated until the appliance has
reached the set temperature. If the appliance is
switched off for an extended period, the temperature
alarm may be triggered when it is first switched on
again.
The temperatures flash and the display panels show
the "alarm" symbol until the appliance has reached the
set temperatures.
By pressing the "Alarm off/Lock" button the
temperature warning is switched off.
The lights come on when the appliance doors are
opened.
The following temperatures are recommended by the
manufacturer and pre-set at the factory:
Fridge compartment 37 °F (3 °C)
Freezer compartment 0 °F (-18 °C)
Notes on using the appliance
After switching on the appliance, it may be several
hours before the set temperatures are reached.
Do not put any food in the appliance before then.
Thanks to the fully automatic NoFrost system, the
freezer compartment remains free of ice. Defrosting
is not required.
Some of the casing end faces are slightly heated to
prevent condensation forming in the door seal area.
If you cannot open the freezer compartment door
again immediately after closing it, wait a moment for
the low pressure created to equalize.

Setting the temperature

Fridge compartment
The temperature can be adjusted between
33 °F (1 °C) up to 45 °F (7 °C).
Repeatedly press the "fridge/super +"
or "fridge/super –" button until the desired fridge
compartment temperature is set.
The temperature last set is saved. The set temperature
is shown on the fridge compartment display panel.
Freezer compartment
The temperature can be adjusted between
3 °F (-16 °C) up to -7 °F (-22 °C).
Repeatedly press the "freezer/super +"
or "freezer/super –" button until the desired freezer
compartment temperature is set.
The temperature last set is saved. The set temperature
is shown on the freezer compartment display panel.

Fast cooling function

Super cooling cools the refrigerator compartment down
as low as possible for approximately 40 minutes. The
temperature is then automatically reset to 37 °F (3 °C).
Super cooling is particularly recommended for the
following:
Before placing large quantities of food in the
refrigerator compartment.
To cool drinks quickly.
Note:
When fast cooling is switched on, the appliance may
make more noise.
Switching on
Press the "fridge/super -" button until "super" appears
on the right on the display panel.
Switching off
Press the "fridge/super +" button.
Note:
The display panel no longer shows "super". The
temperature setting automatically reverts to
37 °F (3 °C).
en-us
15

Publicité

Table des Matières
loading

Table des Matières