Caution On Lithium-Ion Battery - Hitachi CR 18DL Mode D'emploi

CAUTION ON LITHIUM-ION BATTERY

To extend the lifetime, the lithium-ion battery equips with the protection function to stop
the output.
In the cases of 1 to 3 described below, when using this product, even if you are pulling the
switch, the motor may stop. This is not the trouble but the result of protection function.
1. When the battery power remaining runs out (the battery voltage drops to about 12V),
the motor stops.
In such case, charge it up immediately.
2. If the tool is overloaded, the motor may stop. In this case, release the switch of tool and
eliminate causes of overloading. After that, you can use it again.
3. If the battery is overheated under overload work, the battery power may stop.
In this case, stop using the battery and let the battery cool. After that, you can use it
again.
SAVE THESE INSTRUCTIONS
MAKE THEM AVAILABLE TO
OWNERS OF THIS TOOL!
AND
OTHER USERS
AND
English
11