Technical Data - EINHELL TE-TS 2231 U Mode D'emploi D'origine

The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or indust-
rial businesses or for equivalent purposes.
The equipment is to be operated only with suita-
ble saw blades (saw blades made of HM or CV)
It is prohibited to use any type of HSS saw blade
and cutting-off wheel.
To use the equipment properly you must also
observe the safety information, the assembly
instructions and the operating instructions to be
found in this manual.
All persons who use and service the equipment
have to be acquainted with these operating
instructions and must be informed about the
equipment's potential hazards. It is also imperati-
ve to observe the accident prevention regulations
in force in your area. The same applies for the
general rules of health and safety at work.
The manufacturer will not be liable for any chan-
ges made to the equipment nor for any damage
resulting from such changes. Even when the
equipment is used as prescribed it is still impossi-
ble to eliminate certain residual risk factors.
The following hazards may arise in connection
with the machine's construction and design:
•
Contact with the saw blade in the uncovered
saw zone.
•
Reaching into the running saw blade (cut
injuries).
•
Kick-back of workpieces and parts of work-
pieces.
•
Saw blade fracturing.
•
Catapulting of faulty carbide tips from the saw
blade.
•
Damage to hearing if essential ear-muffs are
not used.
•
Harmful emissions of wood dust when used
in closed rooms.
Anl_TE_TS_2231_U_2831_UD_SPK7.indb 30 Anl_TE_TS_2231_U_2831_UD_SPK7.indb 30
GB

4. Technical data

4.1 Technical data of the TE-TS 2231 U
Mains voltage: ................................ 230 V ~ 50Hz
Power P ......................................S6 20% 2200 W
Idle speed n ......................................2,800 min
0
Carbide blade ................. Ø 315 x Ø 30 x 3.0 mm
Carbide saw blade
(alternative) ..................... Ø 315 x Ø 30 x 3.6 mm
Number of teeth .............................................. 24
Table size .......................................550 x 800mm
Table length extension ...................550 x 650mm
Cutting height max. ............................. 83 mm / 0°
.......................................................... 50 mm / 45°
Height adjustment .................... infi nite 0 - 83 mm
Tilting saw blade .......................... infi nite 0° - 45°
Extractor connection
(machine housing) ..............................Ø 100 mm
Extractor connection (saw blade guard) Ø 36 mm
Thickness of the splitter ........................... 2.5mm
Weight ............................................ approx. 46 kg
Weight of slide
(special accessories): ...................... approx. 6 kg
Protection class: ........................................... IP54
Table height .................................. approx. 85 cm
4.2 Technical data of the TE-TS 2831 UD
Mains voltage: .............................. 400 V 3~ 50Hz
Power P ......................................S6 20% 2800 W
Idle speed n ......................................2,800 min
0
Carbide blade ................. Ø 315 x Ø 30 x 3.0 mm
Carbide saw blade
(alternative) ..................... Ø 315 x Ø 30 x 3.6 mm
Number of teeth .............................................. 24
Table size .......................................550 x 800mm
Table length extension ...................550 x 650mm
Cutting height max. ............................. 83 mm / 0°
.......................................................... 50 mm / 45°
Height adjustment .................... infi nite 0 - 83 mm
Tilting saw blade .......................... infi nite 0° - 45°
Extractor connection
(machine housing) ..............................Ø 100 mm
Extractor connection (saw blade guard) Ø 36 mm
Thickness of the splitter ........................... 2.5mm
Weight ............................................ approx. 46 kg
Weight of slide
(special accessories): ...................... approx. 6 kg
Protection class: ........................................... IP54
Table height .................................. approx. 85 cm
- 30 -
-1
-1
23.04.14 08:39 23.04.14 08:39