Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
Fig.G
OPERATION
WARNING:
of serious personal injury, turn appliance
off and remove battery before making any
adjustments or removing/installing attachments
or accessories.
WARNING:
protection that conforms to ANSI Z87.1 (CAN/CSA
Z94.3) while operating this appliance.
WARNING:
making any assembly, adjustments, or changing
accessories. Such preventive safety measures reduce
the risk of starting the TRIMMER accidentally.
CAUTION:
use the appropriate type of cutting line.
CAUTION:
remove any wire, cord, or string-like objects which
could become entangled in the rotating line or spool.
Be particularly careful to avoid any wire which might
be bent outwardly into the path of the appliance, such
as barbs at the base of a chain link fence.
Installing and Removing the Battery Pack
(Fig. H, I)
WARNING:
lever is not engaged to prevent switch actuation
before removing or installing battery.
nOTE: For best results, make sure your battery pack is
fully charged.
To install the battery pack: Align the battery pack
with the rails inside the battery housing and slide it into the
housing until the battery pack is firmly seated and ensure
that it does not disengage.
To remove battery pack: Depress the release button
and firmly pull the battery pack out of the battery housing.
Insert it into the charger as described in the charger section
of this manual.
8
6
4
21
To reduce the risk
Always use proper eye
Remove the battery before
Before you begin trimming, only
Inspect area to be trimmed and
Make certain the lock-off
12
13
Fig. H
12
11
Fig. I
Proper Hand Position (Fig. J)
WARNING:
personal injury, ALWAYS use proper hand position
as shown.
WARNING:
personal injury, ALWAYS hold securely in anticipation
of a sudden reaction.
Proper hand position requires one hand on the primary
handle
14
and one hand on the auxiliary handle
Fig. J
4
Switching Trimmer On and Off (Fig. A)
To turn the appliance on, squeeze the lock-off lever
then the variable speed trigger
off, release the variable speed trigger and the lock-off lever.
WARNING:
trigger in the on position.
Speed Control Switch (Fig. A)
This string trimmer gives you the choice to operate
at a more efficient speed to extend the runtime for
larger jobs, or accelerate the trimmer speed for high-
performance cutting.
To extend runtime, push the speed control switch
forward toward the auxillary handle
position. This mode is best for larger projects that require
more time to complete.
13
To reduce the risk of serious
To reduce the risk of serious
4
.
14
2
and
. To turn the appliance
1
Never attempt to lock the
3
4
into the "LO"
Publicité
Table des Matières
