Operating Instructions; Maintenance And Care; Notes Regarding Environmental Protection; Contact Information - EUFAB 16455 Manuel De L'opérateur

6. OPERATING INSTRUCTIONS

Place the induction charger on the dashboard or
centre console of your vehicle. Use the most even
surface. Observe the safety precautions in section
4. Stick the micro USB B connector of the charging
cable into the charging socket of the induction
charger, Figure 1.
Connect the USB connector of the charging
cable to the USB port of your vehicle or to a USB
vehicle charging device. The induction charger is
now ready to use.
Place your smart phone on the induction charger to charge it. Charging will start
automatically.
Once turned off, disconnect the induction charger from the on board electrical
system in your vehicle to prevent the battery discharging.

7. MAINTENANCE AND CARE

When used as directed, the induction charger needs no maintenance.
Only clean the induction charger with a soft, dry cloth. Do not use any detergents.

8. NOTES REGARDING ENVIRONMENTAL PROTECTION

Do not dispose of electrical devices with the household waste! Electrical and
electronic devices must be collected separately and sent for environmentally
friendly recycling. Please contact your community or city council regarding
disposal options for electrical and electronic scrap.

9. CONTACT INFORMATION

EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
Figure 1: Charging port
7