Changing The Operating Mode - SKF LAGD 1000 Mode D'emploi

4.3.4 Changing the operating mode

Step Key
1
Press for more
than 2s
2
Press briefly
(confirm code)
3
4
Press briefly
5
6
Press briefly
7
Press for more
than 2 seconds
28
Display
Confirm new settings
New settings are written to the memory, and the LED
indicators extinguish
000 in display flashes
Automatically indicates first
parameter
Example: "Pause in timer
operation"
LED "Pause" flashes
Changes from Timer mode to
Counter mode (only possible with
external electrical transmitter)
Values in pulses
Indicates preselected pump
running time in Timer mode
Change over from pump running
time to Counter mode
Special application
Do not activate!
Not to be used with LAGD 1000
SKF LAGD 1000