Important; General Characteristics; Maintenance Par 56 Rgb 1.11 Wireless Lamp - Astralpool LUMIPLUS PAR56 1.11 Manuel D'installation Et D'entretien

ENGLISH
IMPORTANT: The instruction manual you are holding includes essential information on the safety measures to be
implemented for installation and start-up. Therefore, the installer as well as the user must read the instructions
before beginning installation and start-up.
Keep this manual for future reference.
To achieve optimum performance of the LumiPlus PAR56 RGB 1.11 Wireless Lamp, follow the instructions provided
below:
1. VERIFY THE CONTENTS OF THE PACKING:
59124
1 PAR56 RGB 1.11 Wireless Lamp
Installation and maintenance manual
Bag of fastenings
Warranty booklet

2. GENERAL CHARACTERISTICS:

This lamp has been designed to be used fully submerged in fresh water. It is a Class III electric apparatus with very
low safety voltage (12 V with alternating current). The lamp is class 116, in accordance with standard EN 50065.
The floodlamp complies with IPX8 degree of protection at a nominal immersion depth of 2 m.
This floodlamp complies with international safety standards for lights, especially the EN 60598-2-18 standard: LIGHTS
PART 2: SPECIFIC REQUIREMENTS SECTION 18 LIGHTS FOR SWIMMING POOLS AND SIMILAR APPLICATIONS.
LumiPlus Control Motion must not be washed or immersed in water.
The manufacturer is not responsible in any circumstances for assembly, installation or start-up of any electric compo-
nents which have been inserted or handled at locations other than its own premises.
3. INSTALLATION PAR56 RGB 1.11 WIRELESS LAMP:
surface. Recommendation valid for light coloured pools. In darker coloured pools we recommend oversizing the
water installation.
4. ASSEMBLY:
To remove the projector to the edge of the swimming pool (Fig. 1) loosen the two screws of the decorative ring until the
1. Ensure that the lamp is NOT receiving voltage.
2.
Unscrew the two cap nuts (Z), and completely unscrew the two screws (X), see Fig. 3.
3. Change the lamp and assemble the Projector, in the opposite order described, taking special care to:
Fully centre the O-ring in its seat.
It is essential that the direction of the lamp is adequate, situating "TOP" on the top part of the projector.

5. MAINTENANCE PAR 56 RGB 1.11 WIRELESS LAMP:

contact our customer attention service.
THIS LAMP DOES NOT CONTAIN ANY ELEMENTS THAT CAN BE HANDLED, DISMANTLED OR REPLACED BY THE
USER. IT IS FORBIDDEN TO ACCESS INSIDE THE PRODUCT, OTHERWISE THE GUARANTEE OF THE PRODUCT
59126
1 PAR56 RGB 1.11 Wireless Lamp
+1 LumiPlus Control Motion
Installation and maintenance manual
Bag of fastenings
Warranty booklet
WILL BECOME INVALID.
3
59127
2 PAR56 RGB 1.11 Wireless Lamps
+ 1 LumiPlus Control Motion
Installation and maintenance manual
2 Bags of fastenings
Warranty booklet