Melitta Caffeo SOLO Manuel page 66

16 Press the button for coffee strength
cleaning programme.
→ The integrated cleaning programme continues. This stage lasts
approximately 5 minutes. Water flows out of the outlet as well as in the
interior of the appliance into the drip tray. Subsequently, the symbol for the
drip tray illuminates.
→ Phase 2 is completed.
Phase 3
During Phase 3, three bean symbols
17 Empty the drip tray and coffee grounds container.
18 Reinsert the drip tray without the coffee grounds container and place
the coffee grounds container under the outlet.
→ Phase 3 is completed.
Phase 4
During Phase 4, three bean symbols
middle bean will be flashing.
→ The integrated cleaning programme continues. This stage lasts
approximately 5 minutes. Water flows out of the outlet as well as in the
interior of the appliance into the drip tray. Subsequently, the symbol for the
drip tray illuminates.
19 Empty the drip tray and the coffee grounds container and then reinsert
them.
→ The standby symbol
The appliance is ready for operation.
64 64
to continue with the integrated
are shown on the display.
are shown on the display. The
illuminates after a brief heat-up phase.