Resetting The Appliance To The Default Settings - Melitta Caffeo SOLO Manuel

Display
• Press the ON/OFF button
temperature.
→ All symbols in the display flash briefly for confirmation. The appliance is
ready for operation, the standby symbol
8.5

Resetting the appliance to the default settings

Prerequisite: The appliance must be ready for operation (see „Switching on
and off" on page 49).
• Simultaneously press both the button for coffee strength
ON/OFF button
→ All settings are now reset to the factory settings. The standby symbol
will flash briefly for confirmation.
Overview of factory settings:
Function settings
Water hardness
Energy-saving mode
Auto-OFF function
Brewing temperature
58 58
Brewing temperature
low
medium
(factory setting)
high
to confirm the selected brewing
for more than two seconds.
Factory settings
Water hardness 4
5 minutes
1 hour
Medium
is illuminated.
and the