Drum Effects; Recording Drum Effects; Connecting The Device Via Bluetooth - Medion LIFE X64060 Notice D'utilisation

7. Drum eff ects
There are six drum effect pressure pads on the top of the party speaker that you can
use to generate various drum effects.
 Press one or more of the six drum effect pressure pads to generate various drum
effects.
 Press and hold the DRUM CTRL button and press the TOM1 or TOM2 button to
select one of the various sounds for the drum effect pressure pads.
7.1. Recording drum eff ects
You can record the drum effects that you create or a drum effect sequence to play it
back later from the party speaker.
 To start the recording, press and hold the DRUM CRTL button and briefly press
the BASS DRUM button.
The BASS DRUM LED lights up red. Generate the desired drum effects that you
want to record.
The recording is stored in the party speaker's internal memory.
 To stop the recording, press and hold the DRUM CRTL button and briefly press
the HI-HAT button.
The BASS DRUM LED goes out.
 To play back the recording, press and hold the DRUM CRTL button and briefly
press the BASS DRUM button.
The recording is available until the party speaker is either switched off or
goes into standby mode or you make another recording and therefore
overwrite the previous one.
8. Connecting the device via Bluetooth®
In Bluetooth mode, you can receive audio signals wirelessly from an external, Blue-
tooth-enabled audio output device. Make sure the two devices are not more than
10 metres apart.
8.1.1. Pairing Bluetooth-enabled audio output devices
To connect a Bluetooth audio output device (e.g. smartphone or tablet PC), proceed
as follows:
 Switch the party speaker on.
 To switch to Bluetooth mode 1, press the /AUX button twice until 1 is shown
on the display.
 To switch to Bluetooth mode 2, press the /USB button twice until 2 is shown
on the display.
The party speaker is now in search mode and the LED flashes . During the search,
bt flashes on the display.
148