System Settings; Calibration Settings - Xylem SI Analytics TitroLine 5000 Mode D'emploi

132

5 System settings

Fig. 113
From the main menu (Fig. 113), using the front keys <MODE> and then <System settings> will get you
to the system settings:
Fig. 114
Setting the national language was already described in Chapter 2.5.

5.1 Calibration settings

The Calibration settings item is used to select the buffers for the calibration of the pH electrode as well
as to set the temperature of the buffer solution. The temperature has only to be set if neither a
resistance thermometer (Pt 1000, NTC 30), nor a pH electrode with an integrated temperature
measurement probe is connected.
Fig. 115