Power Management - Sharp PN-655U Mode D'emploi

■ Power management

This monitor conforms to VESA DPMS (Display Power Management Signaling) and DVI DMPM (Digital
Monitor Power Management). Both your video card and computer must support the same standard in
order for the monitor's power management function to work.
DPMS Screen
ON STATE Display
STANDBY
No
SUSPEND
display
OFF STATE
DMPM Screen
Monitor ON Display
Active OFF No display
■ DDC (plug and play)
The monitor supports the VESA DDC (Display Data Channel) standard.
DDC is a signal standard for plug and play between monitors and computers. Information about
resolution and other parameters is exchanged between the two. This function can be used if the
computer supports DDC and it has been configured to detect plug-and-play monitors.
There are several types of DDC, depending on the communication method used. This monitor supports
DDC2B.
Power
Hsync Vsync
consumption
550 W Yes Yes
No Yes
1.5 W Yes No
No No
Power
consumption
550 W
1.5 W
55
E