Sharp PN-655U Mode D'emploi page 15

Analog connection with a PC (Input mode: ANALOG)
A PC screen can be displayed with the PC analog RGB input terminal.
• Connect to the display (analog RGB) output terminal on your PC using a PC analog signal (RGB)
cable (commercially available).
• Connect with an audio output terminal on your computer using a PC audio cable (commercially
available).
• Select the input mode "ANALOG" for this connection. (See page 22.)
• Use the automatic screen adjustment when you use this connection to display a PC screen for the
first time or when you change the setting of the PC. (See page 35.)
Output terminals on
connected equipment
Audio Display
• Auto-detects sync signal type.
• Sync signal presence is detected in this order: Composite sync, Horizontal/Vertical separate, and
Sync-on-green. If for some reason both Composite sync and Horizontal/Vertical separate are not input,
the system will operate assuming that the signal is a Sync-on-green (i.e. that the sync signal is
contained in the G signal of RGB). With some types of video signal, this may result in an unstable
image.
• See page 56 for compatible signal timing.
PC analog signal (RGB) cable (commercially available)
PC audio cable (commercially available)
▼ Rear view
PC audio input terminal
PC analog
RGB input terminal
13
E