Remote Control Unit - Sharp PN-655U Mode D'emploi

Remote Control Unit

Generally the monitor is operated using the remote control unit.
22
E
POWER
Turns on/off the power of the monitor (see page 21).
INPUT (Input mode selection)
Each time you press this button, the mode changes in the following order
(see page 8):
• DIGITAL ➞ ANALOG ➞ COMPONENT ➞ VIDEO ➞ DIGITAL...
* If the remote control is not available, you can change the mode by
pressing the input switch on the front panel of the monitor with a sharp
object (see page 8).
MUTE
Turns off the volume temporarily.
Press the MUTE button again to turn the sound back to the previous level.
MENU
Displays and turns off the menu screen (see page 23).
VOL +/- (Volume adjustment)
Pressing or displays the VOLUME menu when the menu screen
is not displayed.
V O L U M E 15
Press to increase the volume, and
* If you do not press any buttons for about 4 seconds, the VOLUME menu
automatically disappears.
Sound is muted when volume is set to "0".
BRIGHT +/- (Backlight adjustment)
Pressing or displays the BRIGHT menu when the menu screen is
not displayed.
B R I G H T 15
Press to increase the brightness of the screen, and
the brightness of the screen.
* If you do not press any buttons for about 4 seconds, the BRIGHT menu
automatically disappears.
SIZE (Screen size selection)
Each time you press this button, the screen size changes in the following
order (see page 34):
• WIDE ➞ ZOOM 1 ➞ ZOOM 2 ➞ NORMAL ➞ Dot by Dot ➞ WIDE...
MODE (Screen mode selection)
Each time you press this button, the screen mode changes in the following
order:
• STD (Standard) ➞ OFFICE (Power saving mode) ➞ VIVID ➞ STD...
DISPLAY
Displays monitor status such as SIZE (screen size), MODE (screen mode),
BRIGHT (backlight adjustment), VOLUME, ID No., model name, serial No.
and so on. The display disappears when you press this button again, or it
disappears automatically after approximately 4 seconds.
to decrease the volume.
to decrease