Connecting The Power Cord - Sharp PN-655U Mode D'emploi

Connecting the Power Cord

Connecting the power cord
• Be sure to set the main power switch to "OFF (O)" (see page 21) before connecting or disconnecting
the power cord.
Do not use a power cord other than the one supplied with the monitor.
Be sure to use a power outlet of 120 VAC (60 Hz).
Using power supply other than the one specified may cause fire.
1. Confirm that the main power switch is set to "OFF (O)".
2. Plug the power cord (supplied) into the AC input terminal.
3. Plug the power cord (supplied) into the AC power outlet.
Power outlet
Plug
(to power outlet)
Disconnecting the power cord
1. Confirm that the main power switch is set to "OFF (O)".
2. Unplug the power cord from the AC power outlet.
▼ Rear view
Plug
(to the AC
Power cord
input
(supplied)
terminal)
Main power switch
"OFF (O)" position
AC input terminal
17
E