Festo DGE Notice D'utilisation page 55

DGE−...−ZR/−SP
If inductive or magnetic limit switches are used:
· Avoid external influence caused by magnetic or ferritic parts in the vicinity of
the reference point switches and limit switches.
With use of inductive proximity sensors SIE−... :
Fig. 25
aF = switch lug
aG = sensor bracket
aH = proximity sensor
With small sizes, hammer head screws
(accessories) can be used for fastening
the sensor bracket in the groove.
These use the cut−out in the cover as a
guide channel.
A 90° turn will bring the hammer head
screw into its holding position.
Festo DGE−...−ZR/−SP 0909f English
aF
aH aG
Fig. 26
Fig. 27
55