Installing The Control Panel; Countertop Cutout Dimensions - Hatco CWBR Série Manuel D'installation Et D'utilisation

INSTALLATION
For CWBX models:
a. Connect the on-site power supply through the power
input knockout to the POWER IN terminal block.
b. Connect power from the POWER OUT terminal block,
through the power output knockout, to the solenoid
valve on the refrigerated well.
c. Connect the temperature probe wire from the
refrigerated well, through the probe wire inlet, to the
digital temperature controller.
Temperature probe installed here.
Wire from probe connects to control panel
(same for CWBR Models).
CWBX model Electrical Connections

Countertop Cutout Dimensions

Width
Model (A)
CWBR-1
17-1/8"–18"
and
(435–457 mm)
CWBX-1
CWBR-2
30-1/8"–31"
and
(765–787 mm)
CWBX-2
CWBR-3
43-1/8"–44"
and
(1095–1118 mm)
CWBX-3
Solenoid Valve
Power Input
Depth
(B)
25-3/16"–26"
(640–660 mm)
25-3/16"–26"
(640–660 mm)
25-3/16"–26"
(640–660 mm)
Countertop Cutout Dimensions

Installing the Control Panel

Use the following procedure to install the control panel.
Control panel must be mounted in a vertical surface.
Mounting control panel in a horizontal surface may result
in the collection of liquids and lead to electric shock.
7-7/16"
(189 mm)
(196 mm)
Control Panel Cutout and Screw Hole Dimensions
NOTE: Make sure the width of the control panel cutout does
not exceed the above dimension.
1. Remove the four trim cover screws from the control panel,
and remove the trim cover.
2. Position the control panel into the cutout opening through
the backside.
3. Fasten the control panel to the vertical surface using four
screws (not supplied).
4. Reinstall the trim cover on the control panel and secure in
position using the four trim cover screws. Seal the trim
cover to the mounting surface with silicone adhesive.
Width
Model (A)
CWBR-4
56-1/8"–57"
and
(1425–1448 mm)
CWBX-4
CWBR-5
69-1/8"–70"
and
(1756–1778 mm)
CWBX-5
CWBR-6
82-1/8"–83"
and
(2086–2108 mm)
CWBX-6
A
10
English
WARNING
1-1/16"
(27 mm)
5-5/8"
(143 mm) 3-1/2"
(89 mm)
7-3/4"
Depth
(B)
25-3/16"–26"
(640–660 mm)
25-3/16"–26"
(640–660 mm)
25-3/16"–26"
(640–660 mm)
B
Form No. CWBRm-0416