Model Description; All Models - Hatco CWBR Série Manuel D'installation Et D'utilisation

MODEL DESCRIPTION

All Models

Hatco Remote Refrigerated Drop-In Wells are reliable and
versatile. Each unit has an insulated, stainless steel and
aluminized steel housing. The sides of the internal well are
completely surrounded with a copper evaporator coil to provide
even cooling from top to bottom. The Remote Refrigerated
Drop-In Well is controlled with a digital temperature controller
and a Power I/O (on/off) Switch housed in a single, remote-
mounted control panel. all models are designed to be mounted
to the topside of various types of countertop material including
stainless steel, wood, Corian, Swanstone, etc... Hatco
Refrigerated Drop-In Wells are designed, manufactured, and
tested to maintain safe food holding temperatures.
Each model is supplied from the factory with the appropriate
number of 20" (508 mm) Pan Support Bars, depending on the
model's pan capacity.
Each individual well is capable of holding a variety of pan
combinations of full size, 1/2-size, 1/3-size, and/or 1/6-size pans
with accessory adapter Bars.
Food Pans, Pan Support Bars, adapter Bars, and other
accessories are available for the Remote Refrigerated Drop-In
Wells. Refer to the OPTIONS aND aCCESSORIES section in
this manual for details.
CWBR-1/CWBX-1
Control Panel
(All Models)
TXV Valve
(All Models)
CWBR-2/CWBX-2
CWBR-4/CWBX-4
l o w
A i r F
Condensing Unit
(CWBR Models only)
Remote Refrigerated Drop-In Well models
CWBR Models
CWBR models consist of a refrigerated well, a remote-mounted
control panel, a remote-mounted condensing unit, and a thermal
expansion valve (TXV valve, shipped loose). all plumbing and
electrical connections between the components as well as to
the electrical supply are the responsibility of the end user and
a qualified installer.
CWBX Models
CWBX models consist of a refrigerated well with a solenoid
valve, a remote-mounted control panel, and a thermal
expansion valve (TXV valve, shipped loose). These
components must be connected to an end user-supplied
condensing unit. all plumbing and electrical connections
between the components as well as to the electrical supply are
the responsibility of the end user and a qualified installer.
CWBR-6/CWBX-6
4
English
CWBR-3/CWBX-3
CWBR-5/CWBX-5
Pans Not Included
Form No. CWBRm-0416