hajdu ZF15 Manuel D'installation Et D'utilisation page 16

SUSPENDING THE STORAGE UNIT
Installation and connection of the hot water tank must be carried out by a qualified
technician in line with the provisions of MSZ HD 60364.
The hot water tank can be suspended using the 1 pc 160×40 wall hanger enclosed
with the appliance. Recommended mounting accessories: 2 pcs 6x45 hex head wood
screws, 2 pcs washers and
2 pcs plastic dowels. These are not included with the appliance!
At the installation location, suitable electrical and water supply and sewage system
must be ensured, and before mounting, the structure of the wall must also be
checked by an architect for compliance.
Wall hanger
Figure 1
Fix the wall hanger (Figure 1), in such way that the wood screws should be driven in
the plastic dowels with the washers. Then, put the appliance onto the wall hanger as
shown in Figure 2.
15