Playing Tracks Repeatedly; Repeat Play; Playing Tracks In Random Order; Shuffle Play - Sony XR-CA430X Mode D'emploi

Playing tracks repeatedly

— Repeat Play

You can select:
• REP-TRACK — to repeat a track.
• REP-ALBM* 1 — to repeat an album.
• REP-DISC* 2 — to repeat a disc.
*1 Available only when optional CD unit with the MP3
file control function is connected.
*2 Available only when one or more optional CD/MD
units are connected.
During playback, press (3) (REP)
repeatedly until the desired setting
appears in the display.
Repeat Play starts.
To return to normal play mode, select "REP-
OFF."
Playing tracks in random
order

— Shuffle Play

You can select:
• SHUF-ALBM* 1
current optional CD unit with the MP3 data
control function in random order.
• SHUF-DISC* 2 — to play the tracks on the
current disc in random order.
• SHUF-CHGR* 2
current optional CD (MD) unit in random
order.
• SHUF-ALL* 3 — to play all the tracks in all the
connected CD (MD) units in random order.
*1 Available only when optional CD unit with the MP3
file control function is connected.
*2 Available only when one or more optional CD (MD)
units are connected.
*3 Available only when two or more optional CD units,
or two or more optional MD units are connected.
During playback, press (4) (SHUF)
repeatedly until the desired setting
appears in the display.
Shuffle Play starts.
To return to normal play mode, select "SHUF-
OFF."
Note
"SHUF-ALL" will not shuffle tracks between CD units
and MD units.
22
— to play the albums in the
— to play the tracks in the

Additional Information

Maintenance

Fuse replacement
When replacing the fuse, be sure to use one
matching the amperage rating stated on the
original fuse. If the fuse blows, check the power
connection and replace the fuse. If the fuse blows
again after replacement, there may be an internal
malfunction. In such a case, consult your nearest
Sony dealer.
Warning
Never use a fuse with an amperage rating
exceeding the one supplied with the unit as this
could damage the unit.
Cleaning the connectors
The unit may not function properly if the
connectors between the unit and the front panel
are not clean. In order to prevent this, detach the
front panel (page 6) and clean the connectors
with a cotton swab dipped in alcohol. Do not
apply too much force. Otherwise, the connectors
may be damaged.
Main unit
Back of the front panel
Notes
• For safety, turn off the ignition before cleaning the
connectors, and remove the key from the ignition
switch.
• Never touch the connectors directly with your fingers
or with any metal device.
Fuse (10 A)