Setting The Clock Automatically; Ct (Clock Time) - Sony XR-CA430X Mode D'emploi

1
Press (PTY) during FM reception.
The current programme type name appears if
the station is transmitting the PTY data.
"- - - - - - - -" appears if the received station is
not an RDS station, or if the RDS data is not
received.
2
Press (PTY) repeatedly until the
desired programme type appears.
The programme types appear in the order
shown in the table.
"NONE" appears if the programme type is
not specified in the RDS data.
3
Press either side of (SEEK/AMS).
The unit starts searching for a station
broadcasting the selected programme type.
14
Setting the clock
automatically

— CT (Clock Time)

The CT data from the RDS transmission sets the
clock automatically.
During radio reception, press (SEL)
and (2) simultaneously
The clock is set.
After one second, the display goes back to the
normal playback mode.
To select "CT-OFF", press (SEL) and (2)
simultaneously again.
Notes
• The CT function may not work even though an RDS
station is being received.
• There might be a difference between the time set by
the CT function and the actual time.