Attaching The Front Panel; Setting The Clock - Sony XR-CA430X Mode D'emploi

Masquer les pouces Voir aussi pour XR-CA430X:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Attaching the front panel

Attach part A of the front panel to part B of the
unit as illustrated and push the left side into
position until it clicks.
B
Notes
• Be sure not to attach the front panel upside down.
• Do not press the front panel too hard against the unit
when attaching it.
• Do not press too hard or put excessive pressure on
the display window of the front panel.
• Do not expose the front panel to direct sunlight or
heat sources such as hot air ducts, and do not leave
it in a humid place. Never leave it on the dashboard
of a car parked in direct sunlight or where there may
be a considerable rise in temperature.
A

Setting the clock

The clock uses a 24-hour digital indication.
Example: To set the clock to 10:08
1
Press (DSPL) for two seconds.
The hour indication flashes.
1 Press either side of (VOL) to set the
hour.
to go forward
VOL
to go back
2 Press (SEL).
The minute indication flashes.
3 Press either side of (VOL) to set the
minute.
to go forward
VOL
to go back
2
Press (DSPL).
The clock starts.
After the clock setting is completed, the
display returns to normal play mode.
Tip
You can set the clock automatically with the RDS
feature (page 14).
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Xr-ca440

Table des Matières