Christopeit Sport BASIC CONCEPT Notice De Montage Et D'utilisation page 17

Step 6:
Installation of the seat padding (22) on the longitudinal bar (3) with the
hexagonal bolt M6x35 (47) and the washers 6//12mm (54).
1. Place the named parts beside the machine.
2. Put one washer (54) on each screw (47).
3. Put the padding (22) on the holders of the longitudinal bar (3). Align
the threaded holes in the padding and the holes in the holders to each
other.
4. Push the screws (47) through the holes in the holders and screw into
the threaded holes in the padding (22) and tighten fi rmly.
Step 7:
Installation of the backrest padding (23) and the padding holders (15)
on the longitudinal bar (3) with the screws M6x35 (47), the washers
6//12mm (54).
1. Place the named parts beside the machine.
2. Push the padding holders (15) onto the shaft of the longitudinal frame
(3).
3. Put one washer (54) on each screw (47).
4. Put the padding (23) on the padding holders (15) of the longitudinal bar
(3).
5. Align the threaded holes in the padding and the holes in the holders to
each other.
6. Push the screws (47) through the holes in the holders and screw into
the threaded holes in the padding (23) and tighten fi rmly.
17