Daily Use; Helpful Hints And Tips; Care And Cleaning - ZANKER EHE60000X Notice D'utilisation

Daily use

Warning! Refer to the Safety chapters.
You operate the hob with the knobs of the oven. The
Daily Use chapter for the oven tells how to operate
the hob.
Before first use
Put cookware containing water on each cooking zone,
set the maximum position and operate the appliance for
10 min. This is to burn off the residue in the appliance.
After that, operate the appliance at minimum position for
20 min. During this period, an odour and smoke can oc-

Helpful hints and tips

Cookware
• The bottom of the cookware must be as thick
and flat as possible.
Energy saving
• If it is possible, always put the lids on the cook-
ware.

Care and cleaning

Important! The risk of burns from residual heat!
Let the appliance become sufficiently cool.
Clean the appliance after each use.
Always use cookware with clean bottom.
Scratches or dark stains on the surface cause no
effect on how the appliance operates.
To remove the dirt:
1. Use the cleaning powder or the cleaning pad.
2. Clean the appliance with a moist cloth and some
detergent.
3. Heat the hotplate to a low temperature and let it to
dry.
4. To keep the hotplates in good shape, regularly rub
in a sewing machine oil. Polish off the oil with ab-
sorbent paper.
cur. This is normal. Make sure that the airflow is suffi-
cient.
Rapid hot plate
A red dot in the middle of the plate shows a rapid hot
plate. A rapid hot plate heats up faster than usual
plates.
The red dots are painted on the plates. They can deteri-
orate during use and even disappear completely after a
period of time. It does not have an effect on the perform-
ance of the appliance.
• Put cookware on a solid hotplate before you
start it.
• Stop the solid hotplate before the end of the
cooking time to use residual heat.
• The bottom of pans and solid hotplates must
have the same dimension.
Important! For stainless steel edges of the hob use the
cleaning agent for stainless steel.
The stainless steel edge of the plate can change
the colour as a result of the high temperature.
The stainless steel can become dirty if the temperature
is too high. Because of this do not cook with the stone
pots, earthenware pans or cast iron plates. Do not use
the aluminium foil to prevent damage to the top during
operation.
The Stainless steel parts wash with water, and then dry
with a soft cloth.
13