Miele Complete C3 SG 3 Serie Mode D'emploi page 51

Masquer les pouces Voir aussi pour Complete C3 SG 3 Serie:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

 Press the - footswitch before the 20
seconds have elapsed.
This switches the Boost function off
and activates maximum power.
 Press the + footswitch again once the
20 seconds have elapsed.
This activates the Boost function a
second time for 20 seconds. It can be
activated three times in a row. After
that, a pause of one minute is required
before reactivating it.
Using the Boost power setting
changes the actual power consump-
tion (see "Notes on Delegated Regu-
lation (EU) No. 665/2013 and
666/2013").
Radio-control handle (dia. 28)
When the vacuum cleaner is switched
on with the On/Off foot control , the
Standby indicator  on the vacuum
cleaner will light up yellow.
 Press the Standby button  on the
handle.
The Standby indicator  on the va-
cuum cleaner will go out.
The first time the vacuum cleaner is
switched on, the highest setting will be
selected automatically.
After that the vacuum cleaner will
switch on at the setting which was used
previously.
 Press the + button to select a higher
suction power level.
 Press the - button to select a lower
suction power level.
Radio-control handle with Boost
function
Some models also feature a Boost
power function. This function uses in-
creased power for a short period for va-
cuuming both fine and coarse stubborn
soiling.
 Press the + switch until the maximum
power level has been reached.
 Then press the + switch again.
This activates the Boost function for 20
seconds. The Boost indicator on the va-
cuum cleaner will light up yellow.
You now have the following options:
 Press the - switch before the 20
seconds have elapsed.
This switches the Boost function off
and activates maximum power.
 Press the + switch again once the 20
seconds have elapsed.
This activates the Boost function a
second time for 20 seconds. It can be
activated three times in a row. After
that, a pause of one minute is required
before reactivating it.
Using the Boost power setting
changes the actual power consump-
tion (see "Notes on Delegated Regu-
lation (EU) No. 665/2013 and
666/2013").
Radio-control handle with Auto func-
tion
Some models also feature an Auto
function.
Auto = automatic adjustment of the
suction power according to the flooring
en
51

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Complete c3 sg 4 sérieHs15Complete c3Sg 3 sérieSg 4 sérieSg 3 serie ... Afficher tout

Table des Matières