Coolmatic Function; Drinks Chill Function; Frostmatic Function; High Temperature Alarm - AEG S94400CTM0 Notice D'utilisation

3. The Holiday indicator goes off.
The function switches off by se-
lecting a different fridge set tem-
perature.

2.9 COOLMATIC function

If you need to insert a large amount of
warm food, for example after doing the
grocery shopping, we suggest activating
the COOLMATIC function to chill the
products more rapidly and to avoid
warming the other food which is already
in the refrigerator.
To switch on the function:
1. Press the Mode button until the cor-
responding icon appears.
The COOLMATIC indicator flashes.
2. Press the OK button to confirm.
The COOLMATIC indicator is
shown.
The COOLMATIC function shuts off au-
tomatically after approximately 6 hours.
To switch off the function before its au-
tomatic end:
1. Press the Mode button until the
COOLMATIC indicator flashes.
2. Press the OK button to confirm.
3. The COOLMATIC indicator goes off.
The function switches off by se-
lecting a different fridge set tem-
perature.

2.10 Drinks Chill function

The Drinks Chill function is to be used as
a safety warning when placing bottles in
the freezer compartment.
To switch on the function:
1. Press the Mode button until the cor-
responding icon appears.
The Drinks Chill indicator flashes.
The Timer shows the set value (30
minutes) for a few seconds.
2. Press the Timer regulator button to
change the Timer set value from 1 to
90 minutes.
3. Press the OK button to confirm.
The Drinks Chill indicator is shown.
The Timer start to flash.
At the end of the countdown the Drinks
Chill indicator flashes and an audible
alarm sounds:
1. Remove the drinks contained in the
freezer compartment.
2. Switch off the function.
To switch off the function:
1. Press the Mode button until the
Drinks Chill indicator flashes.
2. Press the OK button to confirm.
3. The Drinks Chill indicator goes off.
It is possible to deactivate the function
at any time.

2.11 FROSTMATIC function

To switch on the function:
1. Press the Mode button until the cor-
responding icon appears.
The FROSTMATIC indicator flashes.
2. Press the OK button to confirm.
The FROSTMATIC indicator is
shown.
This function stops automatically after 52
hours.
To switch off the function before its au-
tomatic end:
1. Press the Mode button until the
FROSTMATIC indicator flashes.
2.
Press the OK button to confirm.
3. The FROSTMATIC indicator goes
off.
The function switches off by se-
lecting a different freezer set
temperature.

2.12 High temperature alarm

An increase in the temperature in the
freezer compartment (for example due
to an earlier power failure) is indicated
by:
• flashing the alarm and freezer temper-
ature indicators
• sounding of buzzer.
To reset the alarm:
1.
Press any button.
2. The buzzer switches off.
3. The freezer temperature indicator
shows the highest temperature
reached for a few seconds. Then
show again the set temperature.
ENGLISH
7