Temperature Regulation; Child Lock Function; Coolmatic Function - AEG SKD71800S0 Mode D'emploi

44 www.aeg.com

2.4 Temperature regulation

The set temperature of the fridge may
be adjusted by pressing the temperature
button.
Set default temperature: +5°C for the
fridge.
The temperature indicator shows the set
temperature.
The set temperature will be reached
within 24 hours.
After a power failure the set tem-
perature remains stored.
2.5 DYNAMICAIR function
To switch on the function:
1. Press the Mode button until the cor-
responding icon appears.
The DYNAMICAIR indicator flashes.
2. Press the OK button to confirm.
The DYNAMICAIR indicator is
shown.
To switch off the function:
1. Press the Mode button until the DY-
NAMICAIR indicator flashes.
2. Press the OK button to confirm.
The DYNAMICAIR indicator goes
3.
off.
If the function is activated auto-
matically the DYNAMICAIR indi-
cator is not shown (refer to "Daily
use").
The activation of the DYNAMI-
CAIR function increases the ener-
gy consumption.
2.6 Minute Minder function
The Minute Minder function is to be
used to set an acoustic alarm at the pre-
ferred time, useful for example when a
recipe requires to cool down a mixture
for a certain length of time.
To switch on the function:
1. Press the Mode button until the cor-
responding icon appears.
The Minute Minder indicator flashes.
The Timer shows the set value (30
minutes) for a few seconds.
2. Press the Timer regulator button to
change the Timer set value from 1 to
90 minutes.
3. Press the OK button to confirm.
The Minute Minder indicator is
shown.
The Timer start to flash (min).
At the end of the countdown the Minute
Minder indicator flashes and an audible
alarm sounds:
1. press OK button to switch off the
sound and terminate the function.
It is possible to deactivate the function
at any time during the countdown:
1. Press the Mode button until the Mi-
nute Minder indicator flashes.
2. Press the OK button to confirm.
3. The Minute Minder indicator goes
off.
It is possible to change the time at any
time during the countdown and at the
end by pressing the Temperature colder
button and the Temperature warmer
button.

2.7 Child Lock function

To lock the buttons from unintentional
operation select the Child Lock function.
To switch on the function:
1. Press the Mode button until the cor-
responding icon appears.
2. The Child Lock indicator flashes.
3. Press the OK button to confirm.
The Child Lock indicator is shown.
To switch off the function:
1.
Press the Mode button until the
Child Lock indicator flashes.
2. Press the OK button to confirm.
3. The Child Lock indicator goes off.

2.8 COOLMATIC function

If you need to insert a large amount of
warm food, for example after doing the
grocery shopping, we suggest activating
the COOLMATIC function to chill the
products more rapidly and to avoid
warming the other food which is already
in the refrigerator.
To switch on the function:
1. Press the Mode button until the cor-
responding icon appears.
The COOLMATIC indicator flashes.
2. Press the OK button to confirm.