Ravelli FRANCESCA Manuel D'utilisation Et D'entretien page 17

B
C
C
D
E
E F
Minimum opening for masonry and manufactured fireplace (only for pellet fireplace insert)
User and maintenance manual for stoves with RDS technology
C
G
A.-Seal the cover plate (non-combu-
stible);
B.-"L" vent flex section;
C.-The smoke baffle, damper and
shields may be removed if attached
with mechanical fasteners;
D.-The metal sides, frame members,
or other structural components of
the factory built fireplace may not
be removed or altered;
E.-The firebrick (refractory) may be
removed;
F.-The metal floor of the firebox may
be removed leaving the fireplace flo-
or outer wrap;
G.-You shall built a support for in-
sert on raised fireplace.
D = 16.5 " / 419 mm
W = 22.5" / 571.5 mm
H = 26" / 660.4 mm
01/02/2016
Pag.17